Stainless steel food grade cocoa butter filter press

The structure of the filter press consists of three parts: folding rack The frame is the basic component of the filter press, with thrust plates and pressure heads at both ends. The two are connected by girders on both sides. The girders are used to support the filter plate, filter frame and compression plate. To meet advanced hygiene requirements, the racks need to be covered in stainless steel. Stainless steel cladding technology can be used as a reference, and its quality can meet the needs of European customers. A. Thrust plate: Connect to the bracket and place one end of the filter press on the foundation. The middle part of the thrust plate of the chamber filter press is the feed There are four holes in the four corners. The holes in the upper two corners are the inlets for the washing liquid or pressurized gas, and the two lower corners are the outlets (underflow structure or filtrate outlet). b. Compression plate: used to compress the filter plate and filter frame. The roll…